Clean, Lubricate and Protect Firearms with Eco Fix Oil Gun Oil CLP

1/ Open the firearm so the barrel is open at both ends and secure it in a gun-vice so it can't move around.

2/ Apply Eco Fix Oil Gun Oil CLP onto a clean barrel brush and carefully pass it one time down the barrel of the gun and back out again.

3/ Put a clean dry cloth patch over the end of the brush and again pass it one time down the barrel of the gun and back out again.

4/ Check that the patch comes out clean. If not, repeat steps 2-3.

5/ If the gun is going into storage, apply a few drops of Eco Fix Oil Gun Oil CLP onto a clean patch and place it over the brush and pass it one time down the barrel of the gun and back again to put a protective film of oil through the barrel. This will protect the barrel from corrosion during storage. When the gun comes out of storage, run a clean dry patch through the barrel to remove the oil, before use.

6/ Apply some Eco Fix Oil Gun Oil CLP onto a clean cloth and wipe down all metal surfaces of the firearm.

7/ Allow time for the product to work then wipe clean with a clean dry cloth.

8/ Reapply before storing fire-arms for lasting lubrication and corrosion protection.

9/ For bolt-action firearms, put a few drops of oil on the rail where the bolt-guides slide, to keep them well lubricated.

Eco Fix Oil Gun Oil CLP prevents wet and soiling from sticking, making for an easier cleaning and protecting procedure after each use.